Description

W-BACnet: Replacing the BACnet Cable & converting the BACnet packets into MiraMesh - Lumenradio Wireless BACnet Device. RS485, Modbus RTU & BACnet MS/TP master/slave transparent wireless network

W-BACnet replaces the cabling with a reliable wireless mesh eliminating the time-consuming installation planning, cabling, daisy-chaining and troubleshooting.

 

With W-BACnet, it is easy to retrofit connectivity to already installed devices, instantaneously converting individually siloed devices to a wireless network.

 

The product enables flexibility, saving time and costs, including during installation and steady-state operation.

 

The W-BACnet acts as a proxy for the connected BACnet MSTP device, effectively extending the bus and creating the possibility to make legacy products wireless.

 

A W-BACnet network consists of a single W-BACnet Gateway with up to 100 W-BACnet Nodes.

 

Connect your BACnet MS/TP controller using RS485 to the W-BACnet Gateway, and then each of your BACnet MS/TP devices with RS485 to the W-BACnet nodes.

 

The W-BACnet product is built upon LumenRadio’s patented meshing technology MiraMesh - providing ultra-reliable device-to-device connectivity, easy installation, concurrent Bluetooth and extended indoor range. MiraMesh is used in a large number of different applications around the world for building automation, HVAC control, lighting control and industrial sensor networks.


Features

  • Instant commissioning – 3 simple steps, commissioning the W-Modbus network in minutes.
  • Mesh network – cover an entire building, utilizing the mesh network as your infrastructure.
  • Range – 500 meters (line-of-sight) per hop in the mesh network.
  • Cognitive Coexistence – LumenRadio’s patented technology provides industrial-grade reliability and immunity to interference.
  • Self-optimizing network – the mesh network will always find the best way to send messages through the network between devices.
  • Modular configuration – you no longer need to have the same baud rate in the whole network, supports individual settings for each device.

Specifications

  • Power supply: 24 VAC ±15% 50-60 Hz, 24 VDC ±15%
  • Max. power consumption: 2.5 W
  • 24 V output max. power: 10 W
  • Auto resettable fuse: Yes
  • Cable rating, connector: solid / stranded 0.14 – 0.5 mm2 / 0.2 – 0.5 mm2 conductor sizes (AWG) 24 – 20
  • Conductor sizes (AWG) 24 – 20
  • Frequency band: 2.45 GHz, ISM band (2400-2483 MHz)
  • Baud rate: 9600, 19200, 38400, 76800 bps
  • Stop bit: 1, 2
  • Parity: none, even
  • Number of nodes: 100 W-Bacnet Nodes to one W-BACnet Gateway
  • Number of hops: 8 hops in the meshing network
  • Range per hop: 500 m line of sight (approximately 50- 70 m indoors with walls)
  • Output (ERP): Max 20 dBm
  • IP class: 40
  • Material: ABS UL94-V0
  • Colour: White, RAL 9003
  • Ambient temperature: Operating: -20 to +55°C Storage: -30 to +80°C
  • RH: 10 – 95% non-condensing
  • Weight: 95g
  • Dimensions: W86.0 x H86.0 x D25.5 mm

System OverviewW-BACnet: Replacing the BACnet Cable & converting the BACnet packets into MiraMesh - Lumenradio Wireless BACnet Device. RS485, Modbus RTU & BACnet MS/TP master/slave transparent wireless network

A W-BACnet network consists of a single W-BACnet Gateway with up to 100 W-BACnet Nodes. Connect your BACnet MS/TP controller using RS485 to the W-BACnet Gateway, and then each of your BACnet MS/TP devices with RS485 to the W-BACnet nodes.

The W-BACnet network is built on LumenRadio’s MiraMesh, a self-forming and self-healing wireless mesh technology.

 

 

This video contains a short presentation of the solution.

W-BACnet: Replacing the BACnet Cable & converting the BACnet packets into MiraMesh - Lumenradio Wireless BACnet Device. RS485, Modbus RTU & BACnet MS/TP master/slave transparent wireless network

 

 

Meton Connect Integration

Meton Connect - Monitoring/Recording temperature, level, pressure, consumption, fluid flow, energy consumption - AI/DI inputs

 

The W-BACnet tranceiver is fully compatible with Meton Connect IoT datalogger/Modbus Master gateway and Meterscope Web Portal platform.

 
Read more about Meton Connect and the monitoring of a great variety of devices and specific sensors

 

Contact us for more information, demo account or invoice!

 

 

 

 

W-BACnet - Lumenradio W-BACnet Device. RS485, Modbus RTU & BACnet MS/TP master/slave transparent industrial network
English

 

Meterscope Data Collection System

 

Brief presentation of all the available gateways/data loggers & features

 

Meterscope Portal - Cold rooms, freezers, refrigerators, curing chambers, kettles, ovens temperature - Level & pressure in tanks, pumping, stations, production lines - Fluid flow: Water, effluent etc - Energy consumption

 

Meterscope provides compact solutions for small enterprises, supports complicated and large scale modular projects and can be customized to cover specific demands: Meton IoT Devices can be connected to a wide variety of sensors or controllers that support communication protocols and collect the most significant data, depending on each business/industrial sector.

 

 

 

Temperature Data Logger - Meton  EASE

Meton Ease temperature data logger - Temperature / humidity monitoring for up to 2 cold rooms, freezers, refrigerators, curing chambers, storage places etc, along with 2 digital inputs (door open, on/off function etc)

Wireless temperature / humididty / digital input data logger for compact application
  • Temperature / humidity monitoring for up to 2 cold rooms, freezers, refrigerators, curing chambers, storage places etc, along with 2 digital inputs (door open, on/off function etc) & 1 digital output (relay, siren, light)
  • Local WiFi connection - easy and low cost internet service
  • Strong Battery / Low consumption: Can function for at least on month without power supply.

Read more about Meton Ease

 

 

 

Wireless Temperature Gateway - Meton Wireless

Meton Wireless Gateway - Wireless Temperature and Humidity Logging via wireless mBus protocolPlug & play wireless temperature gateway very easy to install
  • Monitoring temperature and digital inputs (operational status, door status, etc.) of refrigeration chambers, refrigerators, freezers, product storage areas, and other devices wirelessly.
  • Sensors communicate via the industrial wireless mBus protocol for greater reliability and energy saving.
  • Autonomous sensors with the ability to be placed even within chambers and a battery life of up to 14 years!
  • Data collection from numerous points and easy to expand

 

Read more about Meton Wireless

 

 

 

Temperature Data Logger - Meton Sense & Sense Plus

Meton Sense Data Logger - Temperature recording/monitoring - Cold rooms,cooling tanks, freezers, refrigerators, curing chambers, kettles, ovens and custom equipmentΤemperature / humididty / digital input data logger supporting 8 on board inputs and expansion modules
  • Cold rooms, refrigerators, curing chambers, kettles, ovens and custom equipment temperature
  • Digital input (normally open/normally closed, function) & outputs (relay, siren, light)
  • Extensive sensor options (RTDs: Pt100, Pt1000, 2 or 3 wire, Thermistors: NTC or PTC, Thermocouple K, J, generic signal transmitters 4...20mA, 0-10V) for a vast temperature range (-200°C to +1800°C), high metering accuracy and long-distance coverage with the Meton Sense Plus

Read more about Meton Sense

 

Meton Sense - Wireless Addon Extra Features

Meton Sense - Wireless Addon - Wireless sensors allowing for extra long battery life (up to 14 years!) & industrial communication protocol providing strong encryption and wide range in order to cover several levels of a building

  • Wireless sensors allowing for extra long battery life (up to 14 years!) &
  • Industrial communication protocol, providing strong encryption
  • Long range reception, covering whole building blocks / serveral floors in urban area
  • Waterproof IP65, polycarbonate cabinet
  • Autonomous internet connection (3G Modem) for stand alone installation or fallback handling in case of bad network
  • Power supply back up (UPS) for energy autonomy and monitoring under power outage condition

Read more about the Wireless Addon of Meton Sense

 

 

 

Device Controllers' Gateway - Meton Connect & Connect Plus

Cold rooms, freezers, cooling tanks, refrigerators, curing chambers, kettles, ovens and custom equipment modbus connection & dataCollecting data directly from the interconnected devices' controllers
  • Recording of data (temperature, operational status of individual components, digital contacts) of cooling control devices, refrigeration chambers, refrigerators, freezers, product storage areas, etc. Interfacing with a variety of controllers (e.g., Dixell, Pego, Eliwell, LAE, etc.) widely used in professional spaces that support the Modbus Protocol
  • Monitoring of energy data (energy consumption, power, network voltage, current) in conjunction with a smart energy meter
  • Capability to collect analog/digital data from integrated sensors with Meton Connect Plus

Read more about Meton Connect

 

 

 

Advanced Recording System - Meton Prime

Data from controllers of refrigerators, cooling chambers, and other devices - measurement of specialized parameters - integration with specialized sensorsSpecialized data collection system
  • Recording of data (temperature, humidity, level, pressure, energy consumption, power, voltage/current, status of individual components, digital contacts) from cooling units, heating systems, transmitters, cooling towers, boiler rooms, etc.
  • Integration with a variety of controllers, specialized devices, and PLCs
  • Ability to collect analog/digital data from specialized sensors (liquid flow, hydrometry data, conductivity, ethylene concentration, heat pump operation, specialized scales, etc.)

 

Explore Meton Prime, for measurement and data recording from sensors of all types.

 

 

 

Laboratory Equipment Monitoring Gateway - Meton Lab

 

Data Collection Recorder for Laboratory / Medical Equipment

Meton Lab gateway: Hospital, lab & pharmaceutical industry equipment monitoring - Cryogenic / Cryostorage system & liquid nitrogen supervision, hospital, laboratory & pharmaceutical industry equipment monitoring, super low temperature data logging, wireless M-Bus & Modbus protocol gateway

  • Data recording (temperature, level, operational status, digital contacts, alarms) of laboratory devices, ultra-freezers, etc., in hospitals, pharmacies, stem cell / graft banks, etc.
  • Measurement accuracy up to +/- 0.15oC with specialized sensors and focus on temperatures from -40 to -185 degrees Celsius
  • Interface with models of ultra-freezers and liquid nitrogen containers for the storage of stem cells/grafts (e.g., ThermoFisher Scientific Thermoforma 700 Series / 7402 / 7403, NEW BRUNSWICK SCIENTIFIC U410, Airliquide Espace 151 / RCB 600 / Arpege 170, Baglioni CryoBA, Taylor Wharton CryoCe24K, etc.)
  • Enhanced device connectivity and simplified installation processes through wireless integration, leveraging the widely adopted Modbus communication protocol and transforming traditional wired setups into a seamless wireless mesh network

 

Read more about Meton Lab

 

 

Contact us for more information, demo account or invoice!